Configuration:
- 1×12 Combo
- Head
- Matching 1×12 Extension cabinet available
- Matching 2×12 Extension cabinet available
Preamp:
- Single Channel
- Vol, Treb, Mid, Bass, Presence
Output Power: 15W
Tubes: 3x 12AX7, 2xEL84
Attenuator:
- Built-In Ironman Precision Power Attenuator
- Precision Tuned Reactive Load
- Transformer Coupling
- Specially tuned for this model
FX Loop:
- Tube Buffered
- Series only
- Bypass switch on front panel
Line-Out:
- Line level output with adjustable level control (on back panel)
- Generated from speaker output – retains same tone as amp driving a speaker
- Can be used to drive a larger amp, PA, mixing board, headphone amp, etc.
- Approx 1v p/p maximum level
Calibration:
- Bias test jacks & adjustment on back panel
- Screen voltage test jacks & adjustment on back panel
Dimensions: Combo: 24 1/8″ (wide) x 18 3/4″ (tall) x 11 3/4″ (deep)
Weight: Combo: 38 pounds
Design & Construction
Output Stage: Fixed Bias (bias adjustment & test points on back panel)
Screen regulator:
- Screen voltage adjustment and test points on back panel
- Reduces sag without hardening the feel of the amp
- Provides ability to fine tune the attack, overdrive characteristics, and feel of the amp
- Extends tube life
Speaker:
- Eminence speaker, custom designed
- Modeled after vintage Celestion G12M
Speaker Cabs:
- Custom Tuning inspired by vintage 4×12 Open Back
- Tuned to retain “full stack” feel at low volume
- Baltic Birch Baffle
- Canadian Birch Body